Eatay Ben Shechter

  • Total activity 8
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 1

Activity overview

Latest activity by Eatay Ben Shechter
  • Eatay Ben Shechter created an article,

    Generate Optimized 3D Models from PAS 880 Imagery in PhotoMesh

    Overview Urban planners, engineers, and city officials face a critical challenge: how to create highly accurate 3D models for large-scale mapping, virtual surveying, and infrastructure inspection—w...

  • Eatay Ben Shechter created an article,

    Enable "Depth Anything V2" in Close Inspection Builds

    PhotoMesh version 8.0.3 leverages Depth Anything V2, an advanced monocular depth estimation model for automated mask creation in Close Inspection projects. This approach is used to create highly ac...

  • Eatay Ben Shechter created an article,

    Integrate Imagery and LiDAR

      PhotoMesh seamlessly combines oblique and nadir photographs with both aerial and terrestrial LiDAR data, automatically converting them into high-resolution, textured 3D mesh models (3DML). This f...

  • Eatay Ben Shechter created an article,

    Rapid Ortho Composite: Accelerating Orthophoto Generation

    The Rapid Ortho Composite is a streamlined preset designed for the production of terrain-based orthophotos. Leveraging automatically extracted terrain data from PhotoMesh aerotriangulation results,...

  • Eatay Ben Shechter created an article,

    Photo Pre-Processing Recommendations

    Non-Optimal Illumination Conditions In circumstances where the lighting conditions are less than ideal, or where the settings of the camera capture were not optimal for the level of light in the da...

  • Eatay Ben Shechter created an article,

    TerraExplorer Webinars

     In this article: Skyline Virtual Trade Show Part 1 - Natural Disaster Relief Skyline Virtual Trade Show Part 2 - TerraExplorer Skyline Virtual Trade Show Part 3- LiDAR and Photogrammetry TerraExp...

  • Eatay Ben Shechter created an article,

    Incorporate Bingo Aerotriangulation Data in the PhotoMesh Build

    This article describes the workflow for incorporating Bingo aerotriangulation data in the PhotoMesh build.  In PhotoMesh, perform an AT Only build (In the Build Parameters dialog, on the Build Set...