Edit basic layer properties from the layer’s property sheet:
- On the side toolbar >
> Project Tree or Layers tab > My Data, right-click the layer you want to edit, and then select Properties. The layer’s property sheet is displayed.
- Edit the layer properties as required:
- Description - Name of layer.
- Point Size - Drag the slider to adjust the size, in pixels, of each of the point cloud’s points.
- Point Color - Color of the point cloud points. Click the color bar to open the Color dialog box, or type the color code in RGB format.
- Intensity Blend - Drag the slider to determine how much the point cloud’s intensity value is factored in colorizing the point cloud, where 0% (all the way to the left) colorizes the point cloud model by point color only, and 100% (all the way to the right) colorizes by intensity only.
- Flatten Terrain - Determines if the terrain under the model is leveled to the model’s elevation value. This option is enabled only if the Altitude Method property in the point cloud property sheet is set to Absolute.???
- Altitude Method - Sets the altitude method to be used by the point cloud model:
- Select Relative to Terrain to place the point cloud model’s pivot point at a specified altitude above the ground.
- Select Absolute to place the point cloud model’s pivot point at a specified altitude above the terrain database vertical datum base ellipsoid.
- Select On Terrain to place the point cloud model's pivot point on the terrain.
- Altitude - Enter the altitude, as defined in Altitude Method, for the point cloud model’s pivot point.
- Click Close.